Plastic light sensitive chicken house door
Thank you for purchasing this plastic easy to install automatic chicken coop door. This manual is designed to help simplify the assembly process
Step by step instructions, please read the following instructions beforeyou begin:

warn:
1. The battery must be new and unused. If a rechargeable battery isused, it must be of the correct voltage (rated power supply voltage is 1.5V). Do not use the rechargeable battery while charging it. Do not use different types of batteries. New and old batteries cannot ! mixed. The batteries must have the correct polarity (such as "+ and"-"). Ithe appliance must be stored for a long time without use,the battery should be removed.

Battery instructions:
Use three AA or LRO6 size alkaline batteries to power the device. Beefore purchasing batteries, make sure the battery packaging is AA oLRO 6
Only use batteries with a rated supply voltage of 1.5V.The better thee quality of the battery, the longer the power life will be. The plasticchicke
house door can be used normally in both cold or hot climate25.

1. Mark the door position (screw hole position)

2. Saw off the wooden board of the door opening

3. Bend doors are not allowed

4. Gently screw in the screws, and make sure the gears on
the backdo not touch the board, otherwise it will affect the operation of thegears


5. Remove the battery box screws and place the batterie5

6. Turn on the switch at the battery box and test the door to see if it can move up and down normally